Tuesday, November 20, 2012

It's about time

Happy weaving hands
It's been far too long since my last post.....5 months to be exact. Not that I haven't thought about posting every week and I have multiple topics to share....but it has been a particularly busy fall for me. I've been working in schools from Connecticut to Maine.

Wise words from a young heart
So here it is November, and it is about time that I stopped procrastinating! I'll include some images from my work in schools not just because this is what keeps me from blogging, but this is what keeps me young and inspired.

This is also a season for gratitude.  As a sales person for Macomber Looms I pride myself in honest, speedy and personal attention to my customers. I do my best to answer your questions and trouble shoot your loom or weaving problems. I also enjoy distance teaching a few of you. So here is my hearty thanks for all your support and business over the past year.

Many of my past blog posts have been about maintenance tips or revealing how parts of the Macomber Loom work.  This post I'd like to share with you how to properly advance and wind your warp so as to avoid the "Bad Dog Syndrome".

"Seasons of Joy" Weston, MA Completed October 2012
This little discussed syndrome came to my attention this past year when a few weavers called in to replace a worn out dog on their warp beams. One of these replacements was for a relatively new loom (2 years old). I also saw this syndrome on looms up at Haystack when I was there to repair looms this spring.

Worn out and tired dog.
The symptoms of "Bad Dog Syndrome" are simple: a dog that is so worn down that it will not engage with the ratchet brake. This will make the ratchet brake slip and not hold your warp under high tension.Here's a photo of  "Bad Dog".

Here's how the most common way to get "Bad Dog Syndrome"
  • Winding a warp with the ratchet brake engaged.
Here's the best way to prevent "Bad Dog Syndrome"
Foot on front brake release pedal while winding warp.
  •  When winding on a new warp, stand at the side of the loom. 
  •  Place your right hand on the crank handle which is on the ratchet brake on the warp beam. Hold the warp beam in place with a bit of pressure.
  • Place your left foot on the front brake by slipping it between the beater and the castle.
  • Disengage the brake at the font, while maintaining pressure on the crank to keep the warp from slipping backwards.
  • Now wind the warp to the back beam.
  • When you are ready to comb out your warp, re-engage the brake. 
Basically what you need to do is wind on the warp without letting the dog go click..click with the ratchet brake. Winding the warp with the dog engaged with the ratchet is what wears down the dog and creates "Bad Dog Syndrome".
 "Good dog" is disengaged while winding warp.

Although many of you might assume that having the dog engaged while winding the warp is a good safety measure, the health of your equipment says otherwise!

New woven art piece November 2012
I have plenty more topics to share, but time has run out...it's time to weave! Here is an image what I am working on now.

In closing here's a little thought from Wilferd Peterson:
 "When we become more fully aware that our success is due in large measure to the loyalty, helpfulness and encouragement we have received from others, our desire grows to pass on similar gifts. Gratitude spurs us on to prove ourselves worthy of what others have done for us. The spirit of gratitude is an energizer."

With gratitude and appreciation to each of you ~
Sarah

24" 8 Harness CPJ Macomber for sale

  24" 8 Harness Macomber CPJ Portable Loom for sale. Double back beams with friction brake and warp separator. 4 reeds, storage box, 2 ...